So very happy with how the tile in the basement bathroom is turning out. It's all cut and laid; just need to grout it, put up the door and closet moulding, and then our contractor will finish up with the tile trim.
I'm particularly thrilled because I'm the one who picked the tile and decided how I wanted it laid out--my husband said I could do what I wanted. I found some 18" tile from HOBO on clearance I really liked--it had a rough texture (I avoid smooth tile on the floor because of the slipping hazard), was neutral in color, and was large so we wouldn't have a lot of grout to maintain. I wanted them installed diagonally because I read somewhere it helps liven up small spaces.
Then, several months later I found some bullnose tile while cruising Menard's that would make great trim in the bathroom. Bought a sample, confirmed it would coordinate with the tile we already had, and then proceeded to buy 6" tile of the same type because I liked it so much. I screwed around with the layout and decided on a pinwheel pattern laid on the diagonal.
Because the space was so small I was worried our contractor would have trouble with the pattern but he didn't. Day 1 he cut the tiles. Day 2 he laid them.
The 6" tile was a particular challenge because even though I hit 3 different stores to cherry pick the tiles with the most apparent streaks I couldn't find enough so I had to buy some that were plainer. I figured it wouldn't matter if they were under the toilet, in the closet or under the vanity so I sorted them into two piles at home, "more streaky" and "less streaky" and also left instructions for our contractor, Dan, to use the streakiest tiles in the visible area of the floor and use the others where they wouldn't be easily seen.
Too bad putting in the floor mat under the tile didn't work out as well for us. I think I mentioned in a previous post that we had installed a floor heating mat under the tile. Turns out we screwed up somehow and didn't realize it until the concrete leveler was put on. The heating mat works but doesn't warm up enough. We don't know if we put down too much leveler or something else, but it might be because we didn't insulate under the mat. The instructions that came with the mat didn't mention insulating underneath the mat but was mentioned in some forums on the internet that I searched after we realized the mat wasn't warming the floor like we wanted. Our electrician double-checked the electrical connection so we know it's not that. Anyhow, I called the manufacturer's tech support and they said that performance would vary depending on the temps outside, etc. and since we didn't insulate under the mat, there might just be too much concrete to heat during a Wisconsin winter.
We suspect that even if we chose a different brand, we wouldn't see an improvement in performance so decided it wouldn't be worth the cost and hassle of tearing it all out. Although I really like the idea of heated tile floors it's not the end of the world if we end up not using it.
I'll post again once the grout is in and the trim is on.
Two clueless cheeseheads attempt to remodel a '70s ranch in southeastern Wisconsin.
Thursday, November 15, 2012
Wednesday, November 7, 2012
Teen Weirds Out Parents With Black Ceiling
Used satin instead of flat on the ceiling on purpose to bounce light around but it doesn't help much |
The mirrored doors also help bounce light around |
We used leftover paint from other projects to paint the stripes |
Tuesday, November 6, 2012
Basement SO Close to Completion!
Yeah, we know this was a stupid thing to do. No one got hurt. |
Overall there weren't too many problems but a few unexpected things occurred that made me really glad we hired professionals. One of those things was our stairwell. I had always wondered why the outer walls in the basement had been drywalled but the stairs were 1/2 drywall and 1/2 paneling. Didn't take long to find out why. Turns out a support beam was placed too close to the stairs and that meant that our drywaller had to bend the wall to fit past the beam. I really didn't think he'd be able to do it but he did and it's not even noticeable unless you know what to look for! Yay for knowledgeable craftsmanship!
Yep, that beam is right up to the stairs-I still don't know how our contractor got drywall in between there! |
Currently my husband is trying to figure out what's going on with our in-floor heat in the bathroom. It just isn't heating up adequately and we haven't been able to figure out why. This was the big screw-up on this project. We didn't test it before the concrete was laid over it and may end up having to take up the concrete to fix it. Thankfully the tile hasn't been laid yet! Makes me sick to my stomach just thinking about it!
If you look you can see the bend in the drywall but once it was painted it was no longer noticeable |
Fireplace framed and ready for drywall |
Fireplace after drywall, electrical and painting |
So, I'll try to remember to put up some pix of the finished trim and the black bedroom. Ugh!
Subscribe to:
Posts (Atom)