Doubling Our Space

It's strange-the original owners intended to
finish the basement but never installed a sump so that was one of the
first things we had to do

So, we've started remodeling our basement.   We've been pretty busy so we've hired out not only the electrical and plumbing but also the framing and drywall work.  Since we aren't doing the work ourselves, there's not much to blog about.  I will mention cabinets though.  We just need a small vanity for the bathroom but finding one turned to out be rather hard.  The local cabinet maker who did our kitchen cabinets wasn't very interested in such a small job and the stuff from Home Depot and Menard's was surprisingly limited and poor quality for the price.  I was thinking Ready-To-Assemble might be a better deal but the shipping cost for one cabinet really jacked up the cost.   I found a company that makes bamboo cabinets out in California, Laguna Bamboo, that had some really nice cabinets and they were willing to ship to Wisconsin, but in the end we ordered semi-custom instead.  I'm going to keep Laguna in mind though for when we redo our master bath...

We used rigid foam board to insulate the walls
and metal studs for all except the bathroom
since no walls will be load-bearing.

Oh, and we thought we were going to have to take the frame off the patio door to get the one-piece shower we ordered into the basement but it fit just fine.  We got a 36" wide unit so it was pretty small.  We had a hard time purchasing it though.  We found it on the Delta website, ordered it from Home Depot, found out HD couldn't order it because it was a Lowe's exclusive, and then got the run-around from Lowe's and Delta but finally got one after tons of phone calls and losing a couple of months in the process.  It's just want we wanted though so I guess it's all good.

The future bathroom is small but will have a sink,
toilet and shower stall

It might just be a gimmick but we figured we'd try
out the Platon sub-floor that put a small space between
the concrete and the sub-floor to keep it warm and dry.
If we're lucky it'll help with reducing radon as well.

We have about one or two more work days for plumbing and two for electrical.  We will be putting in electrical heat under the bathroom floor and an automatic humidity-sensing fan by the shower.  We also need to update our water heater to handle another bathroom and solve some problems with our existing water flow.  Once those are out of the way, it just drywall and flooring and finish work.  And then we'll have doubled our space!

Quartz Let Me Down

There are people who don't really use their kitchens and there are those who do.  We use ours.  So when we were remodeling our kitchen, we wanted sturdy but pretty counters that could take some abuse.   We thought quartz fit the bill but now, less than a year later, we are not impressed with how they are holding up.

In fact,  I think I liked our old laminate countertops better.  I disagree with Consumer Reports and say that my laminate counters were easier to care for than the quartz.

We all know laminate can't take heat.  Turns out quartz can't either.  A couple of weeks ago I missed a trivet while setting down a hot pan.  The pan ended up on the bare countertop.  When I finally noticed what had happened and removed the pan, I noticed a sparkly, pitted ring on the counter.  It looks like the resin that holds the quartz chips together had melted away.  With laminate, heat leaves scorch marks.  With quartz it leaves sparkles.

Around the same time I found a HUGE mystery scratch near the sink.  No explanation for that one; we don't use our counters as cutting boards.  I was really shocked at how noticeable the scratch is.  Sure, our laminate had scratches, but they weren't easy to see.

I have also recently found a chip in the bottom edge of the counter above our under-mounted sink. Now every time I do dishes I worry about possible damage to the counter.  A worry I didn't have with our laminate counters.

I'll be the first to admit we are rough on our environs but that's why we went with quartz.  We bought into the hype. We were expecting an easy care, durable surface that we wouldn't have to worry about too much.  What we got is something else entirely.

Transition Moulding...A Small Success

Wow!  What a gorgeous day today!  I am practically giddy with how mild the weather has been lately.  So giddy that every little triumph seems extra special.  I am currently quite pleased with some transition moulding we put up over the weekend.

We needed it because the pre-existing moulding throughout the house is smaller than the moulding we used in the kitchen.  Was there a reason we bought taller moulding for the kitchen?  Who knows?  I can't remember.  

Anyhow,  it would have looked weird to butt the two sizes right against each other so we needed a transition piece between the two.   The block kind they sell at the stores would be too big and wouldn't look right style-wise.  So I talked my husband into making some himself, something that would work with the plain-Jane ranch moulding but also go with our cabinet moulding, which is a bit fancier.  

Happily, we had some leftover oak moulding from a book case he made for our previous home that would be perfect.  Didn't cost us a dime and looks pretty too!  (I wouldn't be such a pack-rat if it didn't pay off as often as it does!) 

Yay!  The holidays are over!  I'm no Grinch but I am always relieved and happy when all that craziness is over!  I wanted to tell you about a project we just completed.  It didn't take long to do but it was highly satisfying to finish it because it took care of a few things about my bedroom that were bugging me, one for almost 15 years!

What did we do?  We made and installed a fabric headboard for our queen bed.  It was so easy and totally changed how the bed and bedroom looked!

No place for a bed--wall 1: bathroom door,
wall 2: patio door, wall 3: closet, wall 4: window

About 15 years ago I wanted a headboard for our bed.  Like many young couples, we just had the bed frame, which made the bed look out of place in the large bedroom we had at the time.  When we finally shopped for a headboard/footboard my husband talked me into a wood and metal number that I didn't like.  I should have stuck to my guns-that darn bed bugged me from day one!

Fast forward a decade or so when we move to our current home, where our master bedroom is small and awkward. There's really no place to put a bed.  For a few years, we tried angling the bed, which looked dramatic but offended my husband's rigid taste in furniture placement and took up a lot of room.  What to do?    Make a bed that works with the space!

Years ago, a friend of mine mentioned that she made her own fabric-and-plywood headboard and that it was easy to do.  I figured I'd give it a try.  Originally we purchased sheathing wood because the Home Depot kid told us that's what most people who make covered headboards use.  Then we saw the "contains agents known to cause cancer in the state of California" stamp on the board.  No wonder the stuff smelled awful.  Didn't want that by my face each night!  (I digress but I love California for having all those strict labeling laws...CA rocks!)

So we switched to plywood, measured the width of the bed (60" for a queen) and cut it to size.  Laid out the upholstery fabric and foam, wrapped it over the edges, and secured it with a staple gun, making sure to double under the fabric edge so it wouldn't unravel.  I also double padded the sharp corners by back-tucking the foam. It's important to lay the fabric straight across the board so the pattern is level and not pull the fabric so tight so that the foam bulges like my fat thighs do in spandex!  Even though we were careful as we worked, it took only a few minutes to complete.

We then secured it to the wall using heavy duty picture hangers and wall hooks.  That was the challenging part.  Trying to do math and logic when you are overtired (and we were overtired) is not good.  It took us multiple tries to get the placement right and then even longer to get the board attached.  (If you try a wall-mounted headboard I recommend using larger hangers if your foam padding is thick.  We had to jury rig ours by using keychain rings to extend the hangers' reach.)

In the end, we triumphed and the headboard is now snugly attached to the wall. I'm happy to report we are already reaping the benefits.  Removing the headboard and footboard from the bed frame decreased its size by almost two feet so the room looks and feels a lot bigger.  Bonus-our down comforter looks better without the footboard 'cuz now you can see its plushiness.  (Love that plushiness!)  Double bonus-the new headboard is streamlined and fits with the calming, cozy feel I want in our bedroom.  Jackpot-it also physically fits under the window of the only wall you would logically put a bed.  No more angled space-hogging bed!

 The only issue is that old window above the bed leaks cold air like crazy; I was worried we'd be sleeping in a draft but last night was really cold and we didn't feel any air movement.  Maybe it won't be an issue after all.

Ta-dah!

Thanks, Cathy, for giving me that good idea all those years ago!  You always were a great neighbor!

Happy, happy holidays! 

I am SOOOOO happy and I want to share that happiness with everyone! Not only have I finished our Christmas shopping a full week early, I also finished hauling the dirt for our back yard! Yay!

The railroad-tie retaining wall we put in was supposed to be a simple weekend project, cheap and easy to install by ourselves.

A couple of weekends into it and we realized that it wouldn't be done before the ground froze.  We needed help!  Enter our handyman, Kurt.  He had it cut and installed in a couple of days, the only complication being some of our dead men were too close to the surface 'cuz my husband miscalculated how many layers we'd need.  Fixing that added a couple hundred dollars to the bill.

A week or so ago I ordered more topsoil and started hauling wheelbarrow load after wheelbarrow load to the back yard. As the weather got colder, my dirt pile started to freeze and I was really worried that I wouldn't get it done in time. But Wisconsin weather is full of surprises and I had two lovely days this week to get it all hauled and spread. Now I can hit the ground running next spring and get the grass in right away. BONUS! It's also fun to walk along the top, pretending you are on a balance beam.

So close to being done....if only I had a magic wand!

As for my neighbor who recently ripped out his railroad-tie wall, his installation of a new patio, hot tub among the aspens, and rock retaining wall turned out gorgeous! His landscape design company did a meticulous job.

I like it so much that I've decided that when our retaining wall rots out down the road, we'll replace it with a rock wall, which will add nice visual continuity to the bit of woods we share with our neighbors.

My next small project is to make a fabric headboard for my bed. Right now I have a metal-and-wood headboard and footboard that I just never liked. Our bedroom isn't exactly spacious, due to the layout and a large patio door on one wall. A low, neutral headboard that fits under the window is hopefully going to add some much-needed visual space to that room.

I probably won't blog again until the headboard is done which I doubt I'll get to before Christmas, so here's wishing you and yours a really lovely holiday season!

If you look hard enough to the upper right corner you can see the neighbor's new rock wall....love it!

This is going to be a short blog.  Wisconsinites know that you don't ignore a warm November day.  If it's nice ya gotta be out there!  (No matter how trashed the house is!)   'Cuz soon enough it's "geez, it's bleeping cold" time.

Well, today started off being one of those balmy, beautiful days.   Then the rain came.  Doesn't look like it'll last for long though, so I've got a few minutes to quickly tell you about my fun find at our local garden center.

OK, so by now, you've noticed that we start projects but tend not to finish them.  So, we've got our powder room mostly, but not quite, done.  It needed a new light fixture, among other things.

Well, after toying with the idea of making our own and searching 1000s of fixtures online, I gave up looking for the "perfect" fixture and settled for one "that'll do."  Trust me; I had given up on even finding that!  Well, luckily, I found one and even luckier, I found it on sale, which always makes me happy.  We even lucked out a third time 'cuz we were expecting installation to be complicated.  The previous owners had installed their light fixture to the side of the vanity, which looked kind of silly.  We were expecting there to be a reason for it.  You know, a vent or something preventing installation over the center of the vanity.  Turns out not only was there no obstacle, there was even the metal extensions between the studs so that we didn't have to mess around with relocating the electrical connections for the fixture.  Yay!

So, we were lucky three times in this little venture.  Who would guess I'd get lucky one more time?  I did!  I was buying some bulbs at our garden center and while waiting in line at the checkout, I happened to glance at the wall above the register and there was a metal wall sculpture that would be PERFECT in the powder room. AND it was on sale too!  I couldn't believe my luck!

Well, I wasted no time in getting hubby to hang it.  Now I just have to find a towel ring and toilet paper dispenser that'll work...

A Railroad Tie Fiasco

You ever do something to save a few bucks only to find out that long-term you've just cost yourself even more time and money?

Well, let me tell you about our railroad tie fiasco...

So, you may remember that we had a concrete patio put in last spring and, although we love it, it made an already dangerously steep hill even steeper and the dirt was starting to move away from the patio, which once winter came, would crack it apart.  In addition, my kids have been complaining about not having a level, grassy area out back for playing and so we decided to solve both problems by putting in a retaining wall.

Almost halfway done with installing
the timbers; time for the deadmen!

With winter on its way, we needed to work fast.  Although I would have preferred a stone, or even landscape block, retaining wall, those didn't seem to fit our needs.  We needed something we could put in cheap and fast, with little skill level and by ourselves.  (We have to save our pennies for the basement remodel we've started.)  Both our next-door neighbors used railroad timbers in their retaining walls, and our yard has some too, so it seemed like a nice bit of landscaping continuity if we used railroad ties.  We figured they'd be fast, cheap and easy.  (We knew they wouldn't be pretty.)

Once we had a weekend available, we did some measuring and drove to Menard's to get the ties.  What a nightmare!  Railroad ties are so heavy, my husband and I can barely lift them.  They were also too heavy for our minivan. We had to split the load so it took multiple trips.

Crushed gravel for under the timbers.  

We knew we needed to dig out a couple of inches for a crushed gravel pad.  But after my father talked to us and we did some research on the 'net, we found out we also needed to put gravel behind the ties for drainage; Because the grade was so steep, digging turned out to be a major task and took several days instead of the couple of hours I originally figured.

Our "have it done in a weekend" project was now a multiple week project.  We ordered crushed gravel for underneath the timbers and #1 size gravel for behind them, delivered to the project site.  A convenient time-saver I highly recommend.

We put down the gravel pad, and started laying the first course of timbers, which was shockingly difficult. Not only do the timbers need to be level length-wise along the wall, they also need to be level (actually, leaning a bit towards the hill) cross-wise.  The timbers aren't cut precisely so we had to use string and stakes to get the level correct.  We also had to do some much deeper digging for one section of the gravel pad because the hill was steeper in one  spot than in another.  Another week went by.

Trying to spare tree roots was a major concern while digging;
it doubled the amount of time it took to dig out the trench

When my husband tried to hammer stakes into the timbers to keep them together, we were once again reminded of what a pain these railroad ties are.  The stakes couldn't get hammered in, even with using a sledge hammer.  Our drill just wasn't cut out for the job.  So, Craigslist was called into the effort and a week later we had a drill that could handle a 1/2" bit that is 13" long.  That solved the stake issue.

Another time-drainer: we found out cutting through those dense ties was close to impossible.  My husband resorted to using a chainsaw, but even that took more time than we thought it would.

It's now been over a month since we started the wall-from-Hades project. Yesterday we had a couple of hours (before it started raining) to lay down the 2nd and 3rd course of timbers, which we did.  Today my back hurts.  Those suckers are crazy heavy.  So much for "ease of installation."

Leveling the base was a job I left to my husband
with  his awesome math skills; I stuck to the grunt work

Since the timbers are too heavy for me to work on by myself, our available work time is severely limited.   We still have two more courses to go, as well as laying the deadmen, the drain pipe and backfilling with dirt. We are moving so slowly that after our efforts yesterday, my husband called our contractor and asked if he wanted to finish the wall for us.  So much for doing it ourselves to save money.

What's worse is that I chatted with both of my neighbors yesterday.  Turns out the one with all the railroad tie retaining walls (that we can see clearly from our back yard, just signed a contract to have them all ripped out and replace them with beautiful stone walls.  The other neighbor is also taking out his railroad ties and putting in landscaping block.  So much for visual continuity.

Ugh.